1) Download and print out the antique shoe picture, cut out the shoe.
Click here to download
2) Glue the cut shoe onto the matt board. Make sure to put your glue
onto the shoe and smooth out the glue with an old credit card.
Let the glue dry for 3-4 hours.
3) Cut the shoe out from the matt board carefully with your sharp scissors.
Also, you may want to use a craft knife.
4) If the edges of the shoe are rough, you may use a nail file to smooth them out.
5) Turn your shoe to the back, and glue your lace to the outline of the shoe.
(Let dry for 1-2 Hours.)
6) Take your assorted rhinestones, and put a drop of glue on the back of the rhinestone
and glue onto the shoe where the button holes are, per the picture.
Continue until each
button hole is covered.
We also, put a clear rhinestone on the toe tip of the shoe to add
some sparkle.
7) Cut a piece of lace size: 2 1/2" long and glue to the very top of the shoe.
8) Cut a piece of gold cord size: 2 1/2" long and glue on the top of the lace, as per
the picture.
9) Cut 3 strands of pearls size: 1" long and glue toward the top of the shoe as pictured.
10) Cut a piece of white ribbon size: 7" long and glue to the back of the shoe.
