Let's Create:

1) Take the plastic heart apart.
You only need to use one side at a time.

2) Cut your matt board.
(Approximately 1/4" larger than the plastic heart)

3) Cut your fiber fill to cover the one side of the matt board.

4) Cut your material a little larger than the heart to overlap.

5) Glue your fiber fill to the front of your heart.

6) Glue your material over the top of the fiber fill overlapping to the back of the heart and glue.

7) Cut a piece of material large enough for the back of the matt board and glue. (this is optional if you want to finish off the back)

8) Glue your gold cord to the outline of the heart.

9) If you want to finish the back you may want to glue the cord to the back to cover the seams of the material.

10) Adjust your plastic heart to fit the center of the matt board cut out and use a craft knife or the end of your scissors to line up the holes for the fastener. Put your fastener through the holes and just fasten.

11) Glue your cord to the back of the "Mini Shawdow Box" for a hanger.

Your are done!!!

Happy Creating!